|
|
| Tips for applying stickers |
 | Step 1 : Make sure the surface to apply the sticker on is clean. |  | Step 1a : You can optionally make the surface slightly wet (moist) with water and a drop of dish soap. This allows you to fine-tune the sticker's placement later on. |  | Step 2 : Carefully peel the sticker off the sheet. |  | Step 3 : When placing the sticker on the surface, start either from one side to the other, or start in the middle. |  | Step 3a : If you made the surface a little wet you can fine-tune the placement of the sticker. Be careful not to use too much water otherwise the sticker might slide away from your carefully fine-tuned position.
CAUTION : When using water (with a drop of soap), you must let it dry for a while before the sticker really sticks! |  | Step 4 : Finally you can flatten the sticker properly if that's needed by stroking from the middle of the sticker towards the outer edges. If you have bubbles trapped under the sticker you could pop them with a small sharp needle. |
|
|
